-- *****************************************************************
-- CISCO-CATOS-ACL-QOS-CAPABILITY.my:
-- Cisco CISCO-CATOS-ACL-QOS-MIB AGENT-CAPABILITIES
--
-- August 2003, Edward Pham
--
-- Copyright (c) 2003, 2004, 2005, 2008 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-CATOS-ACL-QOS-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;
ciscoCatOSAclQosCapability MODULE-IDENTITY
LAST-UPDATED "200803170000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"The agent capabilities description of
CISCO-CATOS-ACL-QOS-MIB."
REVISION "200803170000Z"
DESCRIPTION
"Add caqCapabilityV08R0701Cat6KPfc,
caqCapabilityV08R0701Cat6KPfc2,
caqCapabilityV08R0701Cat6KPfc3,
caqCapabilityV08R0701Cat6KPfc3b
agent capability statements."
REVISION "200606290000Z"
DESCRIPTION
"Add caqCapabilityV08R0601Cat6KPfc,
caqCapabilityV08R0601Cat6KPfc2,
caqCapabilityV08R0601Cat6KPfc3,
caqCapabilityV08R0601Cat6KPfc3b
agent capability statements."
REVISION "200509060000Z"
DESCRIPTION
"Add caqCapabilityV08R0501Cat6KPfc,
caqCapabilityV08R0501Cat6KPfc2,
caqCapabilityV08R0501Cat6KPfc3,
caqCapabilityV08R0501Cat6KPfc3b
agent capability statements.
Add VARIATION clauses for caqIpAceProtocolMatchCriteria
object in all existing agent capability statements."
REVISION "200406240000Z"
DESCRIPTION
"Add caqCapabilityV08R0401Cat6KPfc,
caqCapabilityV08R0401Cat6KPfc2,
caqCapabilityV08R0401Cat6KPfc3,
caqCapabilityV08R0401Cat6KPfc3b
agent capability statements."
REVISION "200401270000Z"
DESCRIPTION
"Add caqCapabilityV08R0301Cat6KPfc,
caqCapabilityV08R0301Cat6KPfc2,
caqCapabilityV08R0301Cat6KPfc3
agent capability statements."
REVISION "200312190000Z"
DESCRIPTION
"Correct BITS syntax typo."
REVISION "200308251000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 325 }
caqCapabilityV08R0101Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.1(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 1 }
caqCapabilityV08R0101Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.1(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 2 }
caqCapabilityV08R0101Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.1(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup
}
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 3 }
caqCapabilityV08R0101Cat4K AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.1(1) on Catalyst 4000 series
devices."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqAclCpbGroup,
caqFlowPolicingCpbGroup,
caqQueueAssignmentGroup,
caqPolicingGroup
}
VARIATION caqIfTrustStateConfig
SYNTAX INTEGER { trustCoS(2) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqFlowPolicerType
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerNormalRateRequest
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerNormalRateGrant
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerBurstSizeRequest
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerBurstSizeGrant
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerNormalRateAction
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqFlowPolicerStatus
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoCatOSAclQosCapability 4 }
caqCapabilityV08R0301Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.3(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 5 }
caqCapabilityV08R0301Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.3(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 6 }
caqCapabilityV08R0301Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.3(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup
}
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 7 }
caqCapabilityV08R0401Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.4(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 8 }
caqCapabilityV08R0401Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.4(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqVlanAclHitCountGroup
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAclFeatureCpb
SYNTAX BITS { vlanAclHitCount(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 9 }
caqCapabilityV08R0401Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.4(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 10 }
caqCapabilityV08R0401Cat6KPfc3b AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.4(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3B
or PFC3BXL card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqMacAceExtGroup,
caqMacPktClassifyVlanGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
::= { ciscoCatOSAclQosCapability 11 }
caqCapabilityV08R0501Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.5(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 12 }
caqCapabilityV08R0501Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.5(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqVlanAclHitCountGroup
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAclFeatureCpb
SYNTAX BITS { vlanAclHitCount(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 13 }
caqCapabilityV08R0501Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.5(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 14 }
caqCapabilityV08R0501Cat6KPfc3b AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.5(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3B
or PFC3BXL card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqMacAceExtGroup,
caqMacPktClassifyVlanGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 15 }
caqCapabilityV08R0601Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.6(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerPacketsRateGroup,
caqAggPolicerPacketsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 16 }
caqCapabilityV08R0601Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.6(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerPacketsRateGroup,
caqAggPolicerPacketsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAclFeatureCpb
SYNTAX BITS { vlanAclHitCount(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqSecurityAction
SYNTAX INTEGER {
permit(1),
deny(2),
redirect(3),
redirectWithAdj(4),
denyWithLog(5),
denyArpInspection(6),
denyArpInspWithLog(7),
permitArpInspection(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 17 }
caqCapabilityV08R0601Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.6(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerOctetsRateGroup,
caqAggPolicerOctetsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 18 }
caqCapabilityV08R0601Cat6KPfc3b AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.6(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3B
or PFC3BXL card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqMacAceExtGroup,
caqMacPktClassifyVlanGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerOctetsRateGroup,
caqAggPolicerOctetsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 19 }
caqCapabilityV08R0701Cat6KPfc AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.7(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqIfTrustDeviceGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerPacketsRateGroup,
caqAggPolicerPacketsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup,
caqIpOperClassifierGroup
}
VARIATION caqDscpMappingERPolicedDscp
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqAggPolicerERExceedPackets
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION caqSecurityAction
SYNTAX INTEGER { permit(1), deny(2), redirect(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 20 }
caqCapabilityV08R0701Cat6KPfc2 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.7(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC2
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqIpxAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqQosStatsGroup2,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqIpAceExtGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerPacketsRateGroup,
caqAggPolicerPacketsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup,
caqIpOperClassifierGroup,
caqDownloadClassifierGroup,
caqArpLoggingSourceGroup
}
VARIATION caqClassifierMapDirection
SYNTAX BITS { ingress(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAclFeatureCpb
SYNTAX BITS { vlanAclHitCount(0) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqSecurityAction
SYNTAX INTEGER {
permit(1),
deny(2),
redirect(3),
redirectWithAdj(4),
denyWithLog(5),
denyArpInspection(6),
denyArpInspWithLog(7),
permitArpInspection(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 21 }
caqCapabilityV08R0701Cat6KPfc3 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.7(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3
card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerOctetsRateGroup,
caqAggPolicerOctetsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup,
caqDownloadClassifierGroup,
caqIpOperClassifierGroup,
caqSecurityDownloadAclInfoGroup,
caqSecurityDownloadIpAceGroup,
caqIfDownloadAclMapGroup,
caqIfIpPhoneMapGroup,
caqArpLoggingSourceGroup,
caqIpAceTypeGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 22 }
caqCapabilityV08R0701Cat6KPfc3b AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco CatOS 8.7(1) on Catalyst 6000/6500
and Cisco 7600 series devices with PFC3B
or PFC3BXL card."
STATUS current
DESCRIPTION "CISCO-CATOS-ACL-QOS-MIB agent capabilities."
SUPPORTS CISCO-CATOS-ACL-QOS-MIB
INCLUDES { caqIfConfigGroup,
caqIfAclConfigGroup,
caqAclCpbGroup,
caqIpAceGroup,
caqMacAceGroup,
caqActionGroup,
caqPolicingGroup,
caqQosExcessRateGroup,
caqQosMappingGroup,
caqQueueAssignmentGroup,
caqQueueGroup,
caqQosBridgedFlowPolicerGroup,
caqQosStatsGroup,
caqSecurityGroup,
caqFlowPolicingCpbGroup,
caqSecurityPBFGroup,
caqQosExcessBurstGroup,
caqIfTrustDeviceGroup,
caqLoggingGroup,
caqArpInspGroup,
caqSecurityRateLimitGroup,
caqDscpMutationGroup,
caqQosDefaultActionGroup,
caqIfAclConfigGroup2,
caqDscpRewriteGroup,
caqAggPolicerOctetStatsGroup,
caqIpAceExtGroup,
caqIfSecurityAclConfigGroup,
caqAclHitCountGroup,
caqMacAceExtGroup,
caqMacPktClassifyVlanGroup,
caqAclFeatureGroup,
caqPortAclHitCountGroup,
caqVlanAclHitCountGroup,
caqQosL3StatsRateGroup,
caqQosL3StatsPeakGroup,
caqAggPolicerOctetsRateGroup,
caqAggPolicerOctetsPeakGroup,
caqQosPortRateGroup,
caqQosPortPeakGroup,
caqSecurityActionDnldAceGroup,
caqDownloadClassifierGroup,
caqIpOperClassifierGroup,
caqSecurityDownloadAclInfoGroup,
caqSecurityDownloadIpAceGroup,
caqIfDownloadAclMapGroup,
caqIfIpPhoneMapGroup,
caqArpLoggingSourceGroup,
caqIpAceTypeGroup
}
VARIATION caqAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqAceHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIfAclHitCountAclType
SYNTAX INTEGER { ipSecurity(1), macSecurity(3) }
DESCRIPTION "Only limited set of enumerated values
are supported."
VARIATION caqIpAceProtocolMatchCriteria
SYNTAX INTEGER {
none(1),
matchIgmpType(2),
matchIcmpType(3),
matchIcmpTypeAndCode(4),
matchEstablished(5),
matchEapoudp(7),
matchUrlRedirect(8)
}
DESCRIPTION "Only limited set of enumerated values
are supported. When caqIpAceFeature has
the value of 'qos', the supported values
have the additional limitation that
'matchEapoudp' and 'matchUrlRedirect' are
not supported."
::= { ciscoCatOSAclQosCapability 23 }
END